KRG Whiskey-3 Folding 700LA Black Chassis

Kinetic Research Group’s Whiskey-3 Chassis has great features that allow the shooter to set the chassis up to their particular shooting style.

Forend

• Polymer
• Threaded mounting holes at various positions
• Access hole for action mounting screw (allows for the action to be removed without removing the forend)
• Side mounting options for rail
• Flush mount QD sling plate
• External QD cup on both sides of forend

Chassis

• Designed for 5- or 10-round AICS magazines (Rem 700 LA uses CIP-length AICS magazines, Badger M2008 version uses AI AW 10-round double stack magazines)
• Tikka chassis have V-Bedding; Rem 700 chassis have Radius system. Both are CNC’d into aluminum backbone.
• Hardened stainless steel recoil lug
• Rem 700 chassis can accommodate larger aftermarket recoil lugs
• Will accept any barrel contour up to 1.25” straight cylinder (no larger than .9” at the muzzle recommended)

Trigger Guard/Mag catch

• Made of reinforced polymer (Tikka T3 chassis has aluminum)
• Will accept stock Tikka T3 triggers or Barnard triggers
• Rem 700 chassis will accept the new x-mark triggers and most aftermarket triggers
• Mag catch is low profile to reduce snags but still provides excellent ergonomics and control

Magazines Used

• Remington 700 short action and Tikka T3 use AICS either 5 or 10 round .308 mags
• Remington 700 long action and Badger M2008/13 long action use .338 CIP length magazines
• Magazines are not included

Folding Mechanism

• Main latch uses lever style lockup with tapered design which allows lockup through wear of the system
• Secondary latch locks the buttstock into the folded position
• Latch components are made of hardened stainless steel and nitride high strength chromoly steel.

Cheekpiece

• Infinitely adjustable within cheekpiece range (1” travel)
• Quickly removed and re-installed using a clamp and thumbscrew design
• Simple feature allows the cheekpiece to return it to the exact height it had been set
• Made of polymer

Buttstock

• Length of pull is between 13.3” to 15.3” depending on version
• Length of pull is adjustable in 1/4” increments for a total of 2” adjustment
• CNC milled from billet aluminum
• Buttpad moves vertically to set positions within range
• Buttpad has tool-less adjustments
• Buttpad can tilt 15° to each side

Mounting features

• Buttstock has QD sling mount on each side
• Harris bipod stud is included on the forend
• All stocks come with one MOE L2 and MOE L3 rail

Materials

• Most Aluminum parts are Type III hard anodized
• Fasteners are stainless steel with black oxide coating
• Steel parts are salt bath nitrided or stainless steel
• Grip panels are injection molded reinforced polymer

The Whiskey-3 Chassis is available for the following inlets:

• Tikka T3 (non-magnum length calibers)
• Remington 700 (short and long action)
• Sako TRG-22 and TRG-42
• Sako M995

Download the Whiskey-3 Chassis Installation Instructions here.