Sig Sauer ROMEO-M17 1x24mm Circle/Dot Enclosed MIL-SPEC Coyote Tan Pistol Reflex Sight SORM1700

Designed specifically for the U.S. Military contract M17 handguns, the ROMEO-M17 delivers the quality and performance that all Sig Sauer products are known for. It attaches to the host weapon via SIG-LOC (Sig Leverage Optimizing Connection) – a proprietary design that mounts from underneath pistol slide and reuses the MHS pistol rear sight block to create a solid interface between the optic and pistol. The ROMEO-M17’s housing is made from high-strength 7075 Aluminum, and utilizes a fully enclosed argon purged optical system for ultimate protection from the elements, recoil, and impacts. Two drainage holes machined in the sides of the housing allows pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting).

The ROMEO-M17 is powered by a single CR2032 battery and features a minimum continuous runtime of 20,000 hours at the medium brightness setting. The battery compartment is side-mounted, allowing the battery to be changed without removing the optic from the pistol. The ROMEO-M17’s reticle allows the user to choose between a 2 MOA dot, a 32 MOA circle, or a dot/circle combination. Other features of the ROMEO-M17 include independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.

Features of the ROMEO-M17:

• Specifically designed for the U.S. Military contract M17 handgun
• A fully enclosed, sealed, and purged optical system, for ultimate protection from the elements
• Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block and sight block screw
• 7075 Aluminum housing
• Integrated gas deflector on the front of the housing
• Machined anti-reflection grooves on all rear surfaces for reduced glare
• Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
• SIG-LOC (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup.
• A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only, dot only, or circle/dot combination).
• Independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
• 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
• A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled, for use with or without tools.
• Minimum continuous runtime of 20,000 hours, at medium brightness setting
• 2 drainage holes machined in the sides of the housing, just behind the rear sealed window, to allow pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting)
• Windage and elevation adjustments have tactile clicks. Adjustment screws are slotted, for use with any small flat-blade tool. Adjustment resolution is 1.5 MOA per click.

NOTE: The ROMEO-M17 is specifically designed for the U.S. Military contract M17 handguns, and is NOT compatible with commercial M17 variations.