+1 570 368 3920

Athlon Ares ETR 3-18x50mm APRS6 FFP IR MIL Riflescope 212106

SKU 212106-Athlon

List Price $1,249.99
Your Price
You Save $250.00

Get notified by email when this product's price is reduced.

iconThis item ships for free Offer valid within continental United States. Excludes firearms & ammunition.

Export Restrictions
Government Export Restriction
This item may be regulated for export by the U.S. Department of State or the US Department of Commerce. Please see our Export Policy.


The Ares ETR 3-18x50 APLR6 Riflescope was designed with rifle hunters and PRS shooters in mind. Its UHD glass lenses have been fully multicoated for decreased reflection and enhanced light transmission for clearer, more vibrant images. In addition, the Ares ETR 3-18x50 is equipped with an APLR6 reticle in the first focal plane. The first focal plane positioning shrinks and grows the reticle with your target as you zoom in or out, this allows for rapid target acquisition at mid-range while providing precise holdover positions at long range.

Features of the Ares ETR 3-18x50 APLR6 Riflescope

  • UHD glass
  • First focal plane reticle
  • Etched glass reticle
  • Illuminated reticle
  • Advanced fully multicoated lenses


  • Item ConditionNew
  • Scope Weight:31.4 ounces
  • Scope Length:14.2 inches
  • Magnification Range:3x - 18x
  • Scope Objective Diameter:50mm
  • Scope Tube Size / Mount:34mm
  • Turret Adjustment (Click Value):0.1 MIL
  • Elevation Turret Details:32 MIL
    Exposed Elevation Turret
  • Windage Turret Details:25 MIL
  • Parallax Adjustment:Side Focus - 10 yards to infinity
  • Reticle Position:First focal plane
  • Reticle Details:APRS6 FFP IR MIL, Glass Etched
  • Field of View:39.2ft - 6.65 ft @ 100 yards
  • Eye Relief:3.74 inches
  • Illuminated Reticle:Yes
  • Scope Finish:Black
  • Scope Turret Rotation:Counter Clockwise (CCW)
  • Product TypeRiflescopes
  • UPC813869022249
  • MPN212106

Customer Reviews

Average Rating
December 10, 2022

Mounted on DMR style AR build in 20moa M-Brace. Found zero in flat light onto a black target 55gr AE. Continued to print with 7 different loads at 100yds. Best print 3” low. Dialed .9mils, spot on. So far tracking is 100%. Had to use lit reticle on black target (#4 brightness). Immediately went to 550yds on a downhill shot. Was using this optic to call corrections for another shooter around magnification 7-10. Unknown cosine. When it was my turn estimated elevation too high. 2 shots to correct. On plate 19 of 20rds. The .2mil wind holds in the APRS6 were needed as variable full value wind called for anywhere from 2.2-2.5mils wind-hold depending on gusts. Flat light/shadowed plate/used #3 lit reticle. Elevation turret starting to break in just a touch. Locking windage knob better than the hard covered windage knob on my Trijicon 10 Mile(only used windage for zero). This optic good enough for the mile on my 300wsm or 300wm platforms. No comparison to Gen1 Viper. Eye relief more generous than my Gen2 Viper. No clearance issue on AR in 20moa one piece 1.5” mount. ***order sunshade and caps as they are not included with this optic***

Was this review helpful?  

Review this product


Get News, Deals and Updates

EuroOptic International Sites:

Please Wait...