|
|
Chad
May 16, 2020
The price of the 92x Performance trigger group is amazing. The only thing that is more amazing than the price is the performance of this kit. The trigger is now so smooth in double action and single action. There are some very good videos on the internet to help you install this kit. Thank you Beretta for releasing this kit!
|
AVERY
November 1, 2023
I bought this to put on my 92x and it works great. I was able to put it in myself after a little bit of work. It made the Breta really fun to shoot with a lighter and smoother trigger pull.
|
GS
January 31, 2023
The Xtreme-S trigger is a real value for around $100 or so. Thanks to YouTube videos the install isn’t that hard.
|
GS
January 31, 2023
The Xtreme-S trigger is a real value for around $100 or so. Thanks to YouTube videos the install isn’t that hard.
|
Ethan
January 20, 2023
The 101 dollar price point is amazing (200 dollar MSRP at Beretta website), I rate this trigger group highly, up there with the LTT TJIAB, especially with its value to performance ratio. The sear spring I could not install, it was too stiff and so I used my stock spring. It was installed in a Beretta 96G Brigadier Elite II and gave it new life.
In comparison to the TJIAB it contains my favorite trigger profile, the 92X P trigger which you cannot buy in black for some reason. It's checkered which is great for when you're shooting in hot weather and get sweat on the trigger, the semi straight profile is a good balance between straightness for SA and the traditional curvature of DA triggers.
|
Aaron
March 15, 2022
If you are looking for a 92 series trigger, this is the one. The new trigger shoe is much nicer than the factory unit in my M9A3 and the reset is much shorter, such that the trigger resets right to the wall which makes followups much quicker and predictable. Installation is a little tricky, but there are plenty of videos to help. If you are debating between this and the Langdon, I'd highly recommend this unit. It is a better kit and costs just over half as much. One thing I would recommend is a 13# hammer spring to go along with it. With that configuration I had zero malfunctions.
|