
A162-NF
847362003542
Nightforce
Nightforce Magmount 1.44 0 MOA 34mm A162 is a one-piece mount for 34mm scopes, with the rings built in. It stands 1.44 inches high and has no cant. A third crossbolt adds clamping force, and the whole thing is built to MIL-STD 1913.
The detail that sets it apart is the cant, or the lack of one. This mount has zero MOA of taper, and it’s made for rifles whose rails already have the tilt built in, such as a 20 MOA rail. If you put a canted mount on a canted rail, you’d double up the angle. The zero-cant Magmount avoids that and keeps the scope aligned with the rail.
The Nightforce Magmount uses a three-jaw clamping system. The third crossbolt gives extra protection against recoil and keeps the scope from shifting. Because the rings and base are one piece, there’s nothing to line up, and the scope isn’t stressed as you tighten the screws.
The 1.44 inch height clears scopes with objectives up to 56mm on a continuous rail. That’s useful for larger scopes that need the room. It’s built from aluminum with titanium crossbolts, so it stays light while carrying the load.
A Nightforce scope mount has to match your scope and your rail, so check both. This one is for 34mm main tubes, and Nightforce makes a 30mm Magmount separately. If your rail is flat, the Unimount line with a 20 MOA cant may suit you better.
The 1.44 inch height is a standard choice for AR-style rifles, and this Nightforce mount is the three-jaw version. The 34mm mount you choose should suit your rifle’s rail first.
The Nightforce Magmount 1.44 0 MOA 34mm A162 gives 34mm scopes a one-piece, three-jaw mount with no cant for canted rails.
Add all 0 items in this product bundle to your cart with one click.

A162
Earn 885 reward points (worth $8.85) when you purchase with the EuroOptic Rewards Credit Card.