
A357-NF
Nightforce
Nightforce X-Treme UltraLite Unimount 1.5 20 MOA 34mm A357 is a one-piece mount for 34mm scopes, with the rings built in. It sits at the extra-high 1.5 inch height and adds a 20 MOA taper. The body is 7075-T6 aluminum, and the crossbolts and jaws are titanium.
Height and taper do different jobs. The 1.5 inch height lifts the scope well above the rail, which gives clearance for a big objective or a tall rail setup. The 20 MOA taper tilts the scope toward the target, so more of its own elevation travel is left for long shots. Together they suit a scope with a large objective on a rifle set up for distance.
The Nightforce unimount is meant to stay on the scope, so you can move the scope between rifles with the mount still attached. Because the rings and base are one piece, there’s nothing to line up. Precise tolerances also help keep the scope from being stressed as you tighten the screws.
This isn’t the extended version, so the scope sits where a standard Unimount would put it. If you need extra forward reach for eye relief, Nightforce makes an extended Unimount too. The finish is matte black, and the mount fits a Picatinny rail.
A taller mount raises your eye position, so think about your cheek weld before you order. If you don’t need the height, Nightforce makes the 34mm mount in lower sizes, and a 0 MOA version if you’d rather not have a tilt. A Nightforce scope mount has to match your tube size, and this one is for 34mm main tubes. The 30mm version is a separate item.
The Nightforce UltraLite Unimount line is built to keep weight down, and the aluminum and titanium do that here. A 34mm mount at this height should be checked against your rifle first.
The Nightforce X-Treme UltraLite Unimount 1.5 20 MOA 34mm A357 gives 34mm scopes a tall, one-piece, low-weight mount with a 20 MOA taper.
Add all 0 items in this product bundle to your cart with one click.

847362008752
A357
Earn 780 reward points (worth $7.80) when you purchase with the EuroOptic Rewards Credit Card.