Sako TRG 42 300WM, (4) mags, logbook, Bolt disassembly wrench/hex key set, spare cheek spacer (installed), Spuhr 44.4MOA 34mm Unimount, Badger FTE Brake, PTG action wrench, factory Sako brake & thread protector - Selling on consignment for Terry

Kit Includes:

• Sako TRG 42 .300 WM Rifle
• (4) magazines
• Manual and rounds fired logbook
• Bolt disassembly wrench and hex key set
• Spare cheek spacer (installed)
• Spuhr 44.4MOA 34mm Unimount
• Badger FTE brake
• PTG action wrench
• Factory Sako brake and thread protector (from factory barrel)

The rifle has the post-2014 upgrades, including M10 style safety and alloy trigger housing. The barrel is a PAC-Nor polygonal 1:8" stainless Super Match which was chambered with a PTG A191 Navy reamer. It was machined to accept the Allen Engineering AE30 suppressor (print enclosed) a Badger FTE brake, and a thread protector. The barrel, brake, and thread protector were black nitride finished by H&M Metal Processing in Ohio, and the barreled action and ancillary parts were then Cerakoted in FDE.

The barrel has 600 rounds on it, and based on the fact that it shows no measurable wear with a throat erosion gauge, and others' experience with salt bath nitriding treatment of Magnum barrels, I fully expect it to last 4-5000 rounds before accuracy begins to deteriorate. When it does need replacement, the buyer will have the action wrench to supply to the gunsmith (most smiths will not have a TRG wrench).