TriggerTech AR9 Single Stage Duty Black/Die-Cast 3.5lb Trigger AH9-SDB-33-NNF

TriggerTech’s line of Pistol Caliber Carbine Triggers were built for competition shooters who needed the most precise and reliable triggers available. These triggers were made to feel like that of a 1911, with a short overtravel and a two-stage action. In addition, the Pistol Caliber Carbine Triggers utilize Zero Creep Technology which doesn’t rely on coating or lubrication, so each trigger pull will be just as consistent as the last.

The Pistol Caliber Carbine Triggers also features CLKR Technology for the smoothest possible pull and a weight that can be adjusted in 2 ounce increments from a set screw. Even when set to the lightest possible setting, changing the pull weight doesn’t affect the dependability of hammer strikes, so reliability is never an issue.

Variations:

• AR-9 - When compared to the standard AR15 model, the AR-9’s hammer design has more mass, which in turn has more inertia. The AR-9’s center of percussion is also lower than that of the AR15’s. The result of these two factors is maximum energy being transferred from the hammer into the firing pin and thus more reliable primer strikes. Available in straight or curved.
• SIG SAUER MPX - TriggerTech’s Trigger for the Sig Sauer MPX was designed with safety as the top priority. It comes equipped with a bumper in the housing to transfer the majority of the blow back energy to the lower receiver, this not only makes it safer, it helps protect the trigger. Available in straight and curved
• Freedom Ordinance FX-9 - The FX-9 trigger by TriggerTech is almost an exact copy of TriggerTech’s AR-9 trigger, complete with a lower center of percussion and a hammer with more mass. The difference is a lower disconnect engagement to provide more space needed for the FX-9 platform bolt carrier group.