
A203-NF
847362004495
Nightforce
Nightforce Ultralite 1.50 XX-High 30mm 4-Screw Ring Set A203 is the tallest four-screw set in Nightforce’s 30mm X-Treme Duty Ultralite line. The bodies are machined from solid 7075-T6 aluminum, with titanium crossbolts and jaws. Nightforce says that gives steel-like performance at half the weight.
At 1.5 inches, this is as tall as the 30mm Ultralite rings go. It’s for builds that need the most clearance, such as a scope with a very large objective or a tall rail setup. It also raises eye position a lot, so plan around your cheek weld. Check your scope’s objective and base height before you order, because a taller ring only helps when you need the room.
On a ring this tall, weight adds up, which makes the Ultralite design worth it. The aluminum bodies and titanium crossbolts and jaws keep the mount light, and four screws per ring keep it leaner than six. The four-screw pattern gives a tight, even grip across the scope tube. If you want more clamping force, Nightforce also makes this height in six screws with 50% more grip. This Nightforce Ultralite ring is the four-screw choice.
The finish is black hard anodized. A tall ring in steel carries a lot of metal, so the half-weight figure counts for more here than on a low ring.
Fit is specific. These are 30mm rings, for scopes with a 30mm main tube, built for 1913 rails. Nightforce offers the 30mm Ultralite rings in six heights, in four-screw and six-screw patterns. This is the 1.5 inch XX-High four-screw set. It’s a 30mm ring in the tallest height, a Nightforce ring set with four screws, and a scope ring pair you can build a tall setup around.
The Nightforce Ultralite 1.50 XX-High 30mm 4-Screw Ring Set A203 gives 30mm scopes the tallest four-screw mount in the line at half the weight of steel.
Add all 0 items in this product bundle to your cart with one click.

A203
Earn 510 reward points (worth $5.10) when you purchase with the EuroOptic Rewards Credit Card.