Nightforce Mounts & Bases
A Nightforce scope will only hold zero as well as the mount underneath it. Weak rings, a loose base or the wrong height undo everything the scope was built to do. Nightforce Mounts & Bases are made by the same company, to the same standard, so the whole system from rail to tube is built to stay put. We carry more than 90 of them, in 30mm and 34mm, in black or Dark Earth, with 0 and 20 MOA options.
Mount Types
UltraLite Rings
Two-piece Nightforce rings are the classic setup. You’ll find them on everything from hunting rifles to tactical builds. The UltraLite line comes in 30mm and 34mm, in five heights:
- .885" Low
- 1.00" Medium
- 1.125" High
- 1.375" X-High
- 1.5" X-Treme
You can choose 4-screw or 6-screw caps, and a few sets come in Dark Earth. These are the Nightforce picatinny rings most shooters start with. Rings give you the most freedom to place the scope on long or broken rails. Shop them on our Nightforce Picatinny rings page.
X-Treme Duty UltraMounts
Nightforce UltraMounts are one-piece cantilever mounts built for hard use. They come in 30mm and 34mm, at 1.54" or 1.93" centerline heights, with 0 or 20 MOA of cant. Each version is offered in black or Dark Earth. The taller 1.93" mounts suit AR-pattern rifles and anyone who shoots with a heads-up position. Browse the full range of Nightforce UltraMounts.
Unimounts
Nightforce Unimounts are one-piece mounts that come in several variants:
- UltraLite Uni-Mounts: 1.125", 1.375" and 1.5" heights, mostly with 20 MOA built in.
- Extended Uni-Mounts: push the scope farther forward for better eye relief.
- XTRM Ultralite Uni-Mounts: use a titanium and alloy build to save weight.
- X-Treme Duty and Magmount: heavier-duty versions of the same design.
See them all on our Nightforce Unimounts page.
Rails, Bases and RAP-i
Nightforce scope bases include one-piece Picatinny bases for Remington, Savage, Howa, Tikka, Weatherby, Winchester and Kimber actions, in both 0 and 20 MOA. A Nightforce picatinny rail is the foundation everything else clamps to, so get the base right first. You’ll find them on our Nightforce Picatinny rails page.
The RAP-i (Rail Accessory Platform) replaces a ring cap with a short rail on top of your scope. It gives you a mounting point for a red dot or other accessory, in 30mm or 34mm, black or Dark Earth.
How to Choose a Nightforce Scope Mount
Tube size. Every Nightforce scope mount and ring set is made for either 30mm or 34mm tubes. Your scope’s tube size is printed in its specs.
Rings or one-piece. Rings weigh less and let you place the scope anywhere along the rail. One-piece Nightforce scope mounts like the UltraMount and Unimount keep both rings perfectly aligned and resist shifting under recoil. That’s why they’re popular on precision and tactical rifles.
Height. Choose the lowest height that clears your objective bell, plus a little room for lens caps. Large 56mm objectives usually need High or X-High rings. AR-style rifles often need the 1.5" to 1.93" range to line your eye up with the scope.
0 or 20 MOA. A 20 MOA base or mount tilts the scope forward so more of your elevation travel is available for distance. If you shoot past 800 yards, it’s worth having. For hunting ranges, 0 MOA is fine.
Fit and finish. Bases are rifle-specific, so match the listing to your action. Pick 4-screw or 6-screw ring caps to match any bubble level you plan to add, and choose black or Dark Earth to match your scope.
Still not sure which Nightforce mount or set of Nightforce scope rings fits your rifle? Send our team your rifle and scope models and we’ll match them. For bubble levels and other add-ons, see Nightforce accessories.