|
|
Sam
May 9, 2018
Good price and fast shipping! Consistent internal capacity within .2 grain h2o. primer pockets still tight after 5 firings and using .5 grain less powder to achieve same velocity with hornady brass
|
Ron Milby
March 4, 2020
Wow, these are the most consistent cases I have ever worked with. Case weights were 10ths of grains difference when spot checking them. They also have nice tight primer pockets.
|
Bill
March 31, 2021
Picked up 100 of these for testing in my PRS competition rifle. I was previously using Hornady Brass, 140 ELD-Ms, 210M, and H4350. The Peterson Brass produces significantly higher velocity, so I would recommend working up a new load if switching from another brand. At this point I've shot all 100 pieces twice. Biggest improvement I've noticed is a huge reduction in SD down into the single digits. I typically get 6 fps SD with my current load and noticed improved performance at distance on the much smaller targets.
|
Shawn Forbes
August 21, 2019
I've never purchased Lapua brass, but I have just about every other make out there and Peterson brass is far and away the most consistent, highest quality brass I've ever used, and now I don't use anything else.
|
Jonathan
April 27, 2022
Product was shipped quickly and packed very well. Would definitely order again. Now to get to loading them.
|
Craig H. Myers
August 18, 2024
Excellent brass, best I've used so far. Definitely helped reduce my ed/sd numbers. I actually measured each round before loading and quality control is top notch with a small variance of .0015 across the board..they were measured to the datum point where the neck and shoulder meet using the Area 419 headspace measuring set for consistency. Hoping for a long life with this brass.
|
B Jordan
December 5, 2021
Excellent quality brass and love the attention on how they secure and treat their customers by putting the cases in a plastic ammo box that can be used later on for loaded ammo. No banging around in bags loosely. Thanks Eurooptics for providing this brass!
|
Eric
May 13, 2019
I have been running this brass in my Tikka T3x Lite. Haven't had any issues with accuracy. No problems with velocity either, Be sure to keep the charges down as this brass is much thicker than Hornady. These have held up to three firings so far with no trouble. These are 100% ready to load out of the box too! Not to mention, you get a free 50rd ammo box to go with them. Check out Chuckin' on YT, you will see the results first hand. Any Tikka 6.5 video features this brass.
|